TNT Equipment Inc.

Specifications

• 2018 New Holland L228 Base
• Year2018
• ManufacturerNew Holland
• Model NameL228
• Trim NameBase
• Generic Type (Primary)General
• Engine Powerper SAE J1349 Gross: 74 hp (55 kW) @ 2500 rpm | per SAE J1349 Net: 68 hp (51 kW) @ 2500 rpm
• Engine ManufacturerFPT /F5H FL463A*F001
• Engine TorquePeak: 232 lb-ft (314 Nm) @ 1400 rpm
• Displacement207 in3 (3.4 L)
• Bore3.9 in (99 mm)
• Stroke4.3 in (110 mm)
• Operational
• Operating ConditionsRated load, 50% tip: 2800 lbs (1270 kg) | Tipping load: 5600 lbs (2540 kg)
• Performance
• Top SpeedTravel, low range: 7.0 mph (11.3 km/h)
• Lift CylindersBreakout force: 6030 lbs (27.3 kN) | Breakout force, bucket cylinder: 8620 lbs (38.3 kN)
• Hydraulics
• Hydraulic FlowPump, standard: 24.2 gpm (91.5 lpm)
• Maximum PressureRelief: 3046 psi (210 bar)
• DimensionsBucket hinge pin: 129.4 in (3287 mm) | Top of ROPS: 78.8 in (2002 mm) | Dump angle: 54.7° | Rollback, bucket on ground: 33.8° | Rollback, bucket at full height: 84.8° | Angle of departure: 23.5°
• Ground ClearanceBottom of belly pan: 8 in (203 mm) | Circle without bucket: 56.2 in (1428 mm) | Circle rear: 70.4 in (1789 mm)
• Overall Width69.6 in (1768 mm)
• Overall LengthWithout attachment with coupler: 117.8 in (2993 mm)
• Wheelbase52 in (1322 mm)
• Bottom ThicknessOf level bucket, fully raised: 122.6 in (3115 mm)
• Axle Bearing Extensions, RearTo bumper: 40.7 in (1034 mm)
• HeightDump reach max: 32.3 in (821 mm)
• Weights
• WeightOperating: 8245 lbs (3740 kg)
• Fuel System
• Fuel InjectionHPCR Direct
• Features
• AspirationAir intake: Turbocharged Aftercooled with external EGR