Information
- ROUND BAR CONCAVES
- HYD GRAIN TANK COVERS
- PIVOTING UNLOAD CHUTE
- INDEPENDENT UNLOAD DRIVE
- LUXURY CAB
- 2 SPD POWER REAR AXLE
- 620/70R42 R1W DUALS
- 750/65R26 REAR TIRES
- AUTO GUINDANCE READY
- ROTARY SCREEN BRUSH
- 1600 ENG/1200 THRESHER
- ** NOT AVAILABLE UNTIL THE
- NEW COMBINE COMES IN
- APPROX JUNE 2025 **
Highlights
- $249,000.00
- Sandusky, Michigan
- Pre-Owned
- 0101CM826837
- 2017
- Case IH
- Axial-Flow 8240
- YHG234729
- 12.9L
- 1677
- Available
- Feeder: 54 in (1372 mm)
Specifications
- 2017
- Case IH
- Axial-Flow 8240
- Base
- General
- 12.9L
- Rated: 480 hp (358 kW) | Maximum: 555 hp (414 kW) | Boost: 75 hp (56 kW)
- Case IH FPT
- 6
- Piston: 787 cu in (12.9 L)
- Tier 4B / Final
- Feeder Reverser Control: Electro-Hydraulic | Stone / Rock Protection: Gear Driven Trap | Threshing System Type, Rotary or Conventional Cylinder: Longitudinal rotor | Rotor or Cylinder Description: Staggered Rasp Bars
- Feeder Tilt: Std | Concave: Electronic, w/position sensor
- or Cylinders: 1 Rotor
- Rotor or Cylinder Speed Range: 220 - 1180 rpm | Feeder Speed Variable: Std
- Cleaning Speed Range: 300 - 1150 rpm | Description: Cross Flow Plus
- Reference Drive Tire Size: Dual IF520/85 R42 CFO, R1
- Tire Size: VF600/70 R28, R1W
- 2WD: 148.5 in (3772 mm)
- Threshing Area Wrap: 180 degrees | Reach from Machine Center: 28' 9" (8.8 m)
- Feeder: 54 in (1372 mm)
- or Cylinder: 30 in (762 mm)
- or Cylinder: 103.3 in (2623 mm)
- Total: 10,075 sq in (6.50 sq m)
- Unloading: 14 in (356 mm)
- Unloading Auger: See Reach from Machine Center
- 13' 4" (4.05 m)
- 297 gal (1125 L) | Diesel Exhaust Fluid (DEF) Tank: 43 gal (163 L)
- Grain Tank: 410 bu (14448 L)
- Unloading Rate: 4.0 bu/sec (141 L/Sec)
- 2WD: 40,414 lb (18332 kg) 2WD w/single tires
- Leveling System Available: Standard | Rubber Tracks Available: 30" or 36" Factory Fit
