Back

2017 Case IH Axial-Flow 8240

MoreLess
Limited Time Offer!

Selling Price -$249,000.00
No Images Available

Selling Price -

$249,000.00

HD Certified Pre-Owned
  • ROUND BAR CONCAVES
  • HYD GRAIN TANK COVERS
  • PIVOTING UNLOAD CHUTE
  • INDEPENDENT UNLOAD DRIVE
  • LUXURY CAB
  • 2 SPD POWER REAR AXLE
  • 620/70R42 R1W DUALS
  • 750/65R26 REAR TIRES
  • AUTO GUINDANCE READY
  • ROTARY SCREEN BRUSH
  • 1600 ENG/1200 THRESHER
  • ** NOT AVAILABLE UNTIL THE
  • NEW COMBINE COMES IN
  • APPROX JUNE 2025 **
  • 2017
  • Case IH
  • Axial-Flow 8240
  • Base
  • General
  • 12.9L
  • Rated: 480 hp (358 kW) | Maximum: 555 hp (414 kW) | Boost: 75 hp (56 kW)
  • Case IH FPT
  • 6
  • Piston: 787 cu in (12.9 L)
  • Tier 4B / Final
  • Feeder Reverser Control: Electro-Hydraulic | Stone / Rock Protection: Gear Driven Trap | Threshing System Type, Rotary or Conventional Cylinder: Longitudinal rotor | Rotor or Cylinder Description: Staggered Rasp Bars
  • Feeder Tilt: Std | Concave: Electronic, w/position sensor
  • or Cylinders: 1 Rotor
  • Rotor or Cylinder Speed Range: 220 - 1180 rpm | Feeder Speed Variable: Std
  • Cleaning Speed Range: 300 - 1150 rpm | Description: Cross Flow Plus
  • Reference Drive Tire Size: Dual IF520/85 R42 CFO, R1
  • Tire Size: VF600/70 R28, R1W
  • 2WD: 148.5 in (3772 mm)
  • Threshing Area Wrap: 180 degrees | Reach from Machine Center: 28' 9" (8.8 m)
  • Feeder: 54 in (1372 mm)
  • or Cylinder: 30 in (762 mm)
  • or Cylinder: 103.3 in (2623 mm)
  • Total: 10,075 sq in (6.50 sq m)
  • Unloading: 14 in (356 mm)
  • Unloading Auger: See Reach from Machine Center
  • 13' 4" (4.05 m)
  • 297 gal (1125 L) | Diesel Exhaust Fluid (DEF) Tank: 43 gal (163 L)
  • Grain Tank: 410 bu (14448 L)
  • Unloading Rate: 4.0 bu/sec (141 L/Sec)
  • 2WD: 40,414 lb (18332 kg) 2WD w/single tires
  • Leveling System Available: Standard | Rubber Tracks Available: 30" or 36" Factory Fit
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $249,000.00
  • Sandusky, Michigan
  • Pre-Owned
  • 0101CM826837
  • 2017
  • Case IH
  • Axial-Flow 8240
  • YHG234729
  • 12.9L
  • 1677
  • Available
  • Feeder: 54 in (1372 mm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.